Power Sources

located on the product.

7.Attachments

Do not use attachment not recommended by the product manufacturer.

8.Damage Requiring Service

This unit should be serviced by qualified service personnel when:

A.The audio input cord has been damaged.

B.Objects have fallen into or fluid has been spilled into the enclosure.

C.The unit has been exposed to rain.

D.The unit has been dropped or the enclosure damaged.

E.The unit exhibits a marked change in performance or does not operate normally.

9.Periods of Nonuse

If the unit is to be left unused for an extended period of time, such as a month or longer, the connecting cord should be unplugged from MP3/iPod to prevent damage or corrosion.

10.Servicing

The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instruction should be referred to qualified service personnel.

The device is operated by 3 pcs of AAA (UM-4) battery (rechargeable/non-rechargeable).

Battery installation

1.Remove the battery compartment cover.

2.Insert 3 x “AAA” (UM-4) batteries. Observe the polarity markings when installing the batteries to avoid damaging the unit.

3.Replace the compartment cover.

Warning

1.Make sure that the batteries are installed correctly. Wrong polarity may damage the unit.

2.Do not mix old and new batteries.

3.Do not mix alkaline, standard or rechargeable batteries.

4.Only batteries of the same or equivalent type as recommend are to be used.

5.If the unit is not to be used for an extended period of time, remove the battery.

6.Do not dispose of batteries in fire, batteries may explode or leak.

7.Replace the batteries when the unit stops operating properly.

8.Remove exhausted batteries from the unit, dispose promptly and properly.

SMPS-85 specifications

The Jensen SMPS-85 is a highly regarded power supply unit renowned for its compact design and robust performance. Tailored for various applications, the SMPS-85 stands out due to its reliable operation and efficient energy conversion. One of its main features is a high power density, allowing it to deliver a stable 85W output while maintaining a small footprint. This is particularly advantageous for space-sensitive projects where every square inch counts.

One of its key technologies is the switch-mode power supply (SMPS) architecture, which differs significantly from traditional linear power supplies. The SMPS design uses transistors to switch the input voltage on and off at high frequencies. This method not only enhances efficiency but also reduces the heat generated during operation, making the SMPS-85 suitable for continuous use in demanding environments.

The SMPS-85 also supports a wide input voltage range, accommodating various power sources typically ranging from 90V to 264V AC. This versatile input capacity makes the unit suitable for global applications, as it can adapt to different electrical standards without requiring additional modifications.

In terms of output characteristics, the Jensen SMPS-85 features excellent load and line regulation. This ensures that the output voltage remains stable despite fluctuations in input voltage or variations in load conditions. The unit is designed to deliver reliable performance even under challenging electrical conditions, which is critical for sensitive electronic devices.

Moreover, the SMPS-85 incorporates advanced protective features such as over-voltage protection, under-voltage protection, and short-circuit protection. These safeguards enhance the reliability and longevity of the power supply, making it a dependable choice for engineers and developers.

The unintrusive size of the SMPS-85 is complemented by its lightweight construction, which facilitates easy installation and integration into a variety of systems. Whether used in consumer electronics, industrial automation, or telecommunications, the Jensen SMPS-85 proves to be a versatile power solution that combines efficiency, durability, and ease of use.

In summary, the Jensen SMPS-85 provides an ideal blend of power output, efficiency, and protective features, making it an outstanding choice for a wide range of applications where reliable power is paramount.