Jensen JiSS-550 owner manual IPod Docking, Docking 1st and 2nd Generation iPod nanos

iPod DOCKING

T his model includes adaptors for adopting different iP od models . If the docking cradle will not be used for an extended period of time, it is recommended to use the “Dock C over” insert to help protect the docking connector.

1. S elect a suitable adaptor for your iP od and insert it into the docking cradle.

2. Y our iP od can now be docked by placing the connector on the bottom of the iP od directly over the dock connector located in the docking cradle. Seat the iPod on the dock connector to assure a proper connection.

F or docking an iP od nano, slide the dock connector to the left and also see note on " DOC K ING 1st AND 2nd G E NE R AT ION

iP od nanos " section of this instruction manual. F or other iP od models, slide the dock connector to the right (center position)

and insert the iP od adaptor for the type of iPod you are using.

3.Insert your iP od with the c onnector facing down and positioned directly over the dock connector located in the docking cradle. Seat the iPod on the dock connector to assure a proper connection.

Insert the iP od	Doc your iP od
adaptor into the	with the connector
dock cradle	in the cradle

Note: When docking your iPod, p leas e be careful to avoid damaging the30-pin connectors located on the iPod and in the docking cradle.

4.S lide the Audio Input S elector switch on the back of the docking cradle to iP od position.

5.P ress the ON/S T ANDB Y button to turn On the main unit.

6. P ress the P L AY / PAUS E button to pause or resume iP od playback.

7.Adjust the sound level by pressing the VOL UME + / - buttons .

Note : T he Volume level cannot be adjus ted us ing the volume control on your iP od when docked.

8.T he iP od charges even during playback.

9.To remove the iP od from the Docking Cradle,press and hold the P L AY /PAUS E button for three seconds to switch off the iPod. You can now gently remove it from the docking cradle.

iP od playback control from remote control:
- P ress the P L AY /PAUS E	button to pause or resume the iP od playback;
- P ress the iP od S kip/S earch F orward		or B ackward	button to skip to the next or previous song;

-P ress and hold the iP od S kip/S earch F orward or B ackward button for fast-forwarding or fast-rewinding during playback.

9

DOCKING 1st AND 2nd GENERATION iPod nanos

First install the iPod nano bracket into theJiSS.-550 Docking Cradle

1st Generation iPod nano: Align your 1st generation iPod nano to the LEFT side of the opening in the nano bracket (Figure 1). Make sure the connector on the bottom of the nano is positioned over the connector in the JiSS-550 dock prior to seating the nano. Carefully slide the nano down onto the connector in order to insure a secure

connection.

Figure 1

2nd Generation iPod nano: Align your 2nd generation iPod nano to the RIGHT side of the opening in the nano bracket (Figure 2 ). Make sure

the connector on the bottom of the nano is positioned over the

connector in the JiSS-550dock prior to seating the nano. Carefully

slide the nano down onto the connector in order to insure a secure

connection.

Note: Be careful not to damage the connector when docking the nano.	Figure 2
Never use force when docking the nano onto the connector.

VIDE O OUT F R OM T HE iP od

Y ou are able to view videos and photos stored in your 5th G eneration iP od on a larger television screen or monitor using the built-in Video Output jacks on the back of the Docking C radle.

T wo video output jacks are available on the back of the Docking Cradle unit.

(1)S -VIDE O S -Video signal.

(2)R C A VIDE O composite video signal (most common on standard televisions with video in).

Video Out (F or 5th G eneration iP ods with video ONL Y )

1.Y ou can connect this unit to a television or other video display that has S -video or composite video inputs.

2.S ecurely dock the iP od with video in the cradle.

3. C onnect the S -video cable (included) into the rear S -video jack or yellow R C A cable (included) to rear R C A video jack on the unit.

4.C onnect the other end of the S -video or yellow R C A cable to VIDE O IN on your television or video display.

5.S lide the Audio Input S elector switch on the back of the docking cradle to iP od position.

6.S elect a movie from your iP od menu.

7.iP od: On the main menu choose video then select video setting.

8.iP od: Make sure the T V Out section is set to “ON”.

9. iP od: S witch back to the movie library and play the movie of your choice.

F or P hoto view (F or iP od with color dis play ONL Y - excludes nano)

1.S lide the Audio Input S election switch on the back of the docking cradle to iP od position.

2.S ecurely dock the iP od with color display.

3.iP od: At T V Out section, make sure it is set to “ON”

4.iP od: G o to P hoto Library and then press play. T he slideshow will play on your device.

Note: 1. T he R C A Video input connector on a television is usually color coded yellow to match the color on the AV cable.

2.When playing slideshows or videos, the audio will only playback through the speakers on this unit.

10