General operation
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press REL button on the panel to open the panel and press the RESET hole with a point object to restore the unit to the original factory settings.
Power button
Press any button except EJECT and REL or insert the disc, USB or SD/ MMC card to turn the unit on. Press and hold for 0.5 seconds the POWER button to turn the unit off.
Press it to switch the set off.
Note: After the unit is off, the volume and radio settings will be memorized and will revert to it when the unit is on.
Volume control
Volume adjust
Rotate the VOLUME knob on the panel to adjust the volume level.
Setting the sound characteristics
Press shortly and repeatedly the SEL button to select the audio setting: VOL, BAS, TRB, BAL, FAD. Rotate the VOLUME knob to adjust the setting.
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.
If you don’t adjust VOLUME knob within 3 seconds after selecting the desired setting, the unit will automatically return to the current mode being displayed.
13