11. TROUBLE SHOOTING
There may be various reasons for the abnormal operation of
Symptoms | Reasons | Remedies |
No power to the unit even after | Power plug is not properly | Check that the power plug is well |
POWER button is pressed. | connected | plugged in. |
Front panel buttons and remote | Power is not connected properly. | Pull out the power plug and after a few |
controller buttons are not working |
| seconds plug in again. |
Disc is loaded but FLT screen | Disc is loaded upside down | Reload the disc in correct position |
does not display any information | Disc is | Clean the disc before loading or |
| ||
|
| use an alternate disc |
No sound from speakers | Audio output terminal is not | Check the connections of audio output |
| tightly connected. | terminal. |
| Amplifier is not working. | Check the power and volume level of |
|
| amplifier |
| The unit is in mute mode. | Press the MUTE button to release the |
|
| audio output |
Abnormal sounds from | Audio output terminal is connected | Connect the audio output terminal to |
speakers | to record terminal of amplifier | disc or AUX terminal of amplifier. |
| One audio output terminal is not | Check the terminal to amplifier |
| correctly connected to the amplifier. |
|
| Scratched or unclean disc. | Clean the disc or use an alternate disc |
| Dirty audio output terminal or audio input | Clean the terminals before reconnecting |
| terminal of amplifier. |
|
Howling noise while playing | Noise from microphone input | Place the microphone away from |
|
| Speakers |
No video picture on TV | The disc is not a | Use a Video CD |
| Video output terminal is not connected |
| to the input terminal of TV |
| Incompatible RF modulator |
| (for TV with only coaxial video |
| input). |
Screen distortion when | External video source is |
set on. | |
| Incorrect video mode. |
Connect the video output terminal to video input terminal of TV
Use an alternate RF modulator to connect the video output terminal into coaxial video input.
Go to Menu and then 4. System Setup to change the video source from external to internal.
Turn off the unit and then correct the
53