Recording
•Turn the power on (➜ page 6).
•Press STOP to stop the unit.
1Slide recording position switch to select a position.
Switch modes according to situations (➜ page 8).
2 Select a folder for recording.
FOLDER
The folder is switched each time you press .
Select among “
” (The factory setting is “
”).
When you select “
”, recording is automatically saved in “
” (If the folder already contains 99 files, the next folder with recordable space is used).
3Press REC/PAUSE (Recording starts).
Each time you press Pause 
Recording resumes
Display during recording
Light stays on. (Blinks while paused.)
The display changes depending 
on recording levels.
In stereo Top side:
side:
Recording elapsed time 
(Blinks while paused.)
To stop: Press STOP .
Folder
[Folder] for this unit means locations in which recording (music) files are stored. There are 4
audio folders “
”
and 1 music folder “
” in this unit.
Using each folder according to the purposes of recording enables you to search files easily later. A maximum of 99 files can be saved into each audio folder 
to 
.
File
Recorded audio data from the starting point to the ending point is saved as a file.
The saved data is called a file.
*Even if you change the position of Recording position switch during recording, the setting will not be changed until the recording is complete.
*Change the recording mode as necessary (➜ page 15).
*Do not block the holes of the zoom microphone and
Basic Operations
RQT9358
9