Panasonic DMR-EH75V warranty DV camcorder recording DV Camcorder Rec, When recording finishes

DV camcorder recording (DV Camcorder Rec.)

[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]

When the “DV Camcorder Rec.” function is used, programs are recorded as a title. At the same time chapters are created at each break in the images and the playlist is created automatically.

Preparation

1Turn off the main unit and DV equipment, then connect the DV equipment with the unit’s DV input terminal (l 68).

2Turn on the main unit and then press [REC MODE] to select the recording mode.

3Turn on the DV equipment and pause play on the DV equipment at the point you want recording to start.

After preparation is completed, the following screen appears.

DV camcorder connection ≥Press [2, 1] to select “Record to HDD” or “Record to DVD” as the copy

DV connection detected.

Start recording?destination and press [ENTER].

You can now continue to step 4, below.

Record to HDD Record to DVD Cancel

ENTER

≥When the screen is not displayed, press [DRIVE SELECT] to select “HDD” or “DVD” and then continue from step 1.

[1]While stopped

Press [FUNCTIONS].

[2]Press [3, 4] to select “Other Functions” and then press [ENTER].

[3]Press [3, 4] to select “DV Camcorder Rec.” and then press [ENTER].

[4]Press [2, 1] to select “Record” and then press

[ENTER].

Recording starts.

When recording finishes

The confirmation screen appears. Press [ENTER] to finish DV camcorder recording.

To stop recording

Press [∫, STOP].

Notes on DV camcorder recording

≥Only one piece of DV equipment (e.g., digital video camcorder) can be connected to the unit via the DV input terminal.

≥If you use video camcorders from other manufacturer’s these are not guaranteed to work.

≥It is not possible to operate the unit from the connected DV

equipment.

≥The DV input on this unit is for use with DV equipment only. (It cannot be connected to a computer, etc.)

≥The DV equipment name may not be shown correctly.

≥Depending on the DV equipment, the images or audio may not be input properly.

≥The date and time information on the tape in the DV equipment will not be recorded.

≥You cannot record and play simultaneously.

If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on.

If that does not work, follow the instructions for manual recording (l 68, Manual recording).

Recording from a video cassette recorder

69

RQT8346