Panasonic SL-CT580 operating instructions Sequential Play

Sequential Play

Basic Play

			OPR			Track number in play
			OFF	4
		5	∫		1 ;	VOL SORRY
	6	9				ALL1 MRANDOM
						LIVE S-X B STRAIN
	:
5						Elapsed playing time of each track
						3 HOLD
r	s VOL
Increase	Decrease

VOL SORRY

ALL1MRANDOM

LIVE S-X B STRAIN

Plug type:

3.5 mm stereo

Label must face
upward.	Close the lid

1 OPEN1

2

R L

Follow steps 1–5.

In step 2: Connect the stereo earphones and wired remote control to the headphone jack [Ë]. (Plug in firm-

ly.)

In step 5: The volume range is 0-25. (Press and hold to change the volume successively.) The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level.

≥Play stops automatically when all the tracks have been played.

≥If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on the system.

Operation	Button		Display/reference
	Press during play.
To pause play			VOL SORRY
	1 ;		ALL1 MRANDOM
			LIVES-X B STRAIN
			Press again to restart play.
	Press during play.		Total number of tracks	Total playing time
To stop play	OPR
	OFF
Stop mode			VOL
	∫			SORRY
			ALL1 MRANDOM
			LIVES-X B STRAIN
	Press during stop mode.
To turn off the	OPR
	OFF
unit Off mode
	∫
	Press during play.		≥During program play (page 5), these but-
Skipping	(Press [:,6] twice to skip to		tons are used to skip forward or backward
tracks	the beginning of the previous track.)		through the programmed sequence of
			tracks.
	Backward Forward
			≥You cannot skip to tracks that have been
		5
			played in random or random repeat play
	6
		9	(page 5).
Searching	:		≥During program play, random play, random
			repeat play or 1-track repeat play (page 5),
through tracks
	Press and hold during play.		search operation is	limited to the current
			track only.

For your reference:

“ ” indication

This indication appears for about 30 seconds if [1;](main unit) or [∫/1] (remote control) is pressed when no disc is loaded in the unit or if the disc is not properly secured.

“*” indication

This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is powered off.)

Resume function

The player stores the track where you stopped play and if you press [1;] (main unit) or [∫/1] (remote control), play resumes from the beginning of that track.

The resume function is canceled (play starts from the first track) if you open the lid when the unit is stop mode. It is also usually canceled when you replace the CD while the unit is in stop mode.

Note!

≥The resume function may work if you replace the CD while the unit is off.

≥If you turned the unit off near the end of the track, play may resume from the beginning of the next track.

≥The resume function works automatically and cannot be turned off.

Removing discs

1Press [∫,OPR OFF] to stop play and disc rotation.

2Slide [OPEN 1] to open the lid.

3Press [PUSH] to release the disc.

Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs.

HSUP

P USH

Note!

Never insert foreign objects into the unit.

Auto power off function

If you leave the unit in stop mode for about 10 minutes (30 sec- onds if disc isn’t loaded), it turns off to save the batteries.

Note on CD-R and CD-RW

This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.

§Finalizing is a process that enables CD-R/CD-RW players to play

audio CD-R and CD-RW.

4