Audio Settings

[VOL]

selects a value in the audio menu. (PUSH SEL) (Push to select) selects items in the audio menu.

[DISP] (Display)

exits from the audio menu.

1 Press [VOL] (PUSH SEL) to open the audio menu.

Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode.

2 Press [VOL] (PUSH SEL) to select a mode be adjusted.

to 3 Turn [VOL] clockwise or counterclockwise to adjust.

Volume

(Setting Range: 0 to 40, Default: 18)

Bass

(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)

Treble

(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)

SQ Adjustment

(Tone/SQ adjustable range : B12 dB to A12 dB (by 2 dB)) Setting range:

SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)

SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)

SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)

Balance

(Setting Range: 15 levels each, Default: CNT (center))

Fader

(Setting Range: 15 levels each, Default: CNT (center))

(«Continued below)

: Up

: Down

: Increased

: Decreased

: Increased

: Decreased

/	: center frequency up/down
[] []: Band selection
[] []: Level up/down

: Right enhanced

: Left enhanced

: Front enhanced

: Rear enhanced

- 16 -