Operating Instructions

Concerning Compact Discs

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shaped CDs can damage the unit.

How to remove a disc from its case How to store the disc in its case

Label side up

How to hold a disc

Portable CD player

Dear Customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future reference.

MODEL NUMBER

SERIAL NUMBER

To install this product in a car, please refer to “Installation Instructions” (attached sheet).

SL-SX392C model only for U.S.A.

SL-SX391C model only for Canada

Model No.

SL-SX392C

SL-SX391C

HOLD

OPE

If the surface is dirty

Wipe it with a damp cloth and then wipe dry.

Wipe from the center toward the outer circumference.

Play surface (shiny surface)

Supplied Accessories

Check the packing carton for these accessories.

SL-SX392C			SL-SX391C
Stereo headphones	1	Stereo earphones		1
(RFEV715P-HS)		(L0BAB0000123)
Wireless remote control	1	Car adaptor		1
(N2QABC000002)		(SH-CDC12PEY)
CR2025 battery for		Car stereo cassette adaptor		1
wireless remote control	1	(SHCDM10B1PYK)
Hook and loop fastener	1
(RMF0255)
Car adaptor	1
(SH-CDC12PEY)

Handling precautions

≥If you are taking the CD from a cold to a warm environment, moisture may form on the CD. Wipe this off with a soft, dry, lint-free cloth before using the CD.

≥Do not write on the label side with a ball-point pen or other writing instru- ment.

≥Do not use record cleaning sprays, benzine, thinner, static electricity pre- vention liquids or any other solvent.

≥Do not attach labels or stickers to CDs. (Do not use CDs with exposed adhe- sive from tape or left over peeled off stickers.)

≥Do not use scratch-proof protectors etc.

Storage precautions

Be sure to store CDs in their cases to protect them from dust, scratches, and warping.

Do not place or store CDs in the following places

≥Locations exposed to direct sunlight ≥Humid or dusty locations ≥Locations directly exposed to a heat

vent or heating appliance

≥In the glove compartment or on the rear deck of an automobile

Car stereo cassette adaptor	1
(SHCDM10B1PYK)

Use numbers indicated in parentheses when asking for replacement parts.

(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site

(http://www.panasonic.com).

Before connecting, operating or adjusting this product, please read
reference.		P	PC		PY
these instructions completely. Please keep this manual for future

Panasonic Consumer Electronics Company,				p
Division of Matsushita Electric Corporation of America				p
One Panasonic Way Secaucus, New Jersey 07094	http://www.panasonic.com
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Canada Inc.	www.panasonic.ca
5770 Ambler Drive, Mississauga, Ontario L4W 2T3	www.panasonic.ca
C 2001 Matsushita Electric Industrial Co., Ltd.		RQT6481-P F1201KN0
			Printed in Japan

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instruc- tions handy for future reference.

Safety

1.Power source—Connect the unit to a power source of the type described in these instructions or as marked on the unit.

2.Polarization—The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug doesn’t fit one way, try reversing it. If the plug still doesn’t fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the plug.

3.Power cord protection—Route the AC power sup- ply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it.

4.Overloading—When connecting the AC power sup- ply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock.

5.Nonuse periods—Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. Leaving the unit connected to a household AC outlet for extended periods can cause battery fluid leakage.

6.Attachments and accessories—Use only the at- tachments and accessories recommended in these operating instructions.

Installation

Placement

1.Foreign material—Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock.

2.Magnetism—Situate the unit away from equipment and devices that generate strong magnetic fields.

3.Stacking—Do not place anything on top of this unit.

4.Wall and ceiling mounting—Do not mount the unit on walls or ceilings unless specified in the instruc- tions.

Environment

1.Water and moisture—Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements.

2.Heat—Situate the unit away from heat sources, such

as radiators. Do not leave it in an automobile ex- posed to direct sunlight with the doors and windows closed as this may deform the cabinet.

2.Do not situate where temperatures fall below 5 oC (41 oF) or rise above 35 oC (95 oF).

Maintenance

(See page 7 for details.)

Unplug the unit from the household AC outlet before cleaning.

Clean with a damp cloth.

Do not use abrasive pads, scouring powders, or sol- vents.

Service

1.Damage requiring service—The unit should be ser- viced by qualified service personnel if:

1.(a) The AC power supply cord or AC adaptor has been damaged; or

1.(b) Objects or liquids have gotten into the unit; or

1.(c) The unit has been exposed to rain; or

1.(d) The unit does not operate normally or exhibits a marked change in performance; or

1.(e) The unit has been dropped or the cabinet dam- aged.

2.Servicing—Do not attempt to service the unit be- yond that described in these operating instructions. Refer all other servicing to authorized servicing per- sonnel.

3.Replacement parts—When parts need replacing en- sure the servicer uses parts specified by the manu- facturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4.Safety check—After repairs or service, ask the ser- vicer to perform safety checks to confirm that the unit is in proper working condition.

This manual was printed with soy based ink.