Panasonic CQ-C700U operating instructions Display Setting

Display Setting

Adjustment to display on the DISPLAY menu

1 Press [MENU] to display the menu display.

For using the remote control, hold down

[SEL] (MENU) for 2

sec. or more.

2 Press []] or [[] to display the DISPLAY menu.

	3 Turn [VOL] to select a function to be
	adjusted.
	For using the remote
	control, use [}] or
Display	[{].
	4 Press [PUSH
	SEL] to adjust.
Menu	For using the remote control, use [BAND] (SET).
	5 Adjust the setting value.
DISPLAY	7 Press [MENU] to close the menu
	6 Press [PUSH SEL].
	For using the remote control, use [BAND] (SET).
	screen.
	For using the remote control, hold down [SEL]
	(MENU) for 2 sec. or more.

DEMONSTRATION

Switching by [PUSH SEL].

ON: Demonstration screen at no operation (default)

OFF: Regular screen

GRAPHIC PATTERN

(Default: All)

Turn [VOL] to make a selection.

All: Sequential display from pattern A to C.

Pattern A-C

S.A.: 19-band display (Spectrum analyzer)

STILL IMAGE PATTERN

(Default: All)

Turn [VOL] to make a selection.

All: Sequential display from pattern 1 to 10

No.1-10

CONTRAST

(Setting range: 1 to 5, Default: Contrast 3)

q : Tilting up view angle

w : Tilting down view angle

CLOCK ADJ

Note: Adjust the clock when “ADJUST” appears on the display.

[[] : Adjusting minutes

[]] : Adjusting hours

q : Forward

w : Backward

Notes:

¡The graphic pattern and still image are changeable. (a page 31)

¡If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. (a page 32)

30CQ-C700U