Panasonic CQ-C3305W Preparation General, Cancellation Demonstration, Clock Adjustment

Preparation

General

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

Cancellation of Demonstration

The demonstration message appears for initial use.

1 Set your car’s ignition switch to the ACC or ON position.

2 Press [PWR] (Power).

3 Hold down [VOL] (PUSH SEL: Select) for 2 sec. or more to open the menu.

4 Press [VOL] (PUSH SEL: Select) to

select the Demonstration setting.

(“DEMO” is displayed)

5 Turn [VOL] counterclockwise.

Notes:

•To return to the regular mode, press [DISP].

•Refer to the section on “Function Setting” (page 21).

•When “NO DISC” is displayed, the Demonstration cannot be cancelled.

	Power on
Power On/off (PWR: Power)	Press [PWR] (Power).	English
	Power off
	Hold down [PWR] (Power) for 1 sec. or
	more.

You can remove the face plate to prevent it from being stolen.

Clock Adjustment

The 24-hour system is used for the clock.

1 Press [PWR] (Power).

2 Press [DISP].

3 Hold down [DISP] for 2 sec. or more.

4 Adjust the hour and press [DISP].

[]: Forward

[]: Backward

5 Adjust the minute and press [DISP] to confi rm the adjustment.

[]: Forward

[]: Backward

Notes:

•Adjust the clock when “ADJUST” appears on the display.

•Hold down [] or [] to change numbers rapidly.

•When “NO DISC” is displayed, the clock cannot be adjusted.

	Removing	Mounting	General
Removing/MountingPlate System)Theft-(Anti			Preparation,
	1 Turn off the power. ( above)	1 Fit the face plate with its left hole on the
	2 Press [OPEN]. The face plate will be	left pin provided on the main unit.
		2 Fit the other hole on the other pin
	opened.
	3 Push the face plate to	applying slight pressure.
	the left.
	4 Pull it out toward you.
	5 Put the face plate in
	the case.
Face	Cautions	• Do not touch the contacts on the face plate or on
		the main unit, since this may result in poor electrical
	• This face plate is not waterproof. Do not expose it to	contacts.
	water or excessive moisture.
		• If dirt or other foreign substances get on the
	• Do not remove the face plate while driving your car.
		contacts, wipe them off with clean and dry cloth.
	• Do not place the face plate on the dashboard or
		• To avoid damaging the face plate, do not push it
	nearby areas where the temperature rises to high.
		down or place objects on it while it is open.

	The display changes as follows every time [DISP] is	At power-on:
ChangeDisplay Display)(DISP:	pressed.	When the power is set to ON, refer to the description for
	At power-off:	each source mode.
	Clock display (Default)
	Display off

8 CQ-C3305W CQ-C3305W 9