RECEIVER | EJECT BUTTON | MOUNTING |
COMPARTMENT |
| PLATE GUIDE |
|
| SPINES |
MOUNTING |
|
|
PLATE |
|
|
XR9 |
| CONNECTOR |
CONNECTOR |
| GUIDEPIN |
b. After making sure the connectors are properly lined up, gently press down on the receiver to mate the connectors together. The receiver should
now be attached securely to the mounting plate. Press the receiver into position in the boom box housing; it will click into place. Apply power to the XB9 by pressing the Power ON/OFF button; the LED indicator lights green. If the Receiver does not turn on at the same time, press the Power On/Off ( 
) button in the upper left corner of the Receiver front panel.
4. Removing the Receiver From the XB9
Press the EJECT button on top of the Boom Box; the receiver will swing out automatically. Gently grasp each side of the Receiver at the top and pull straight up to disengage it from the mounting plate.
INSTALLING/REMOVING
THE XR9
PUSH IN AT TOP TO
SECURE IN PLACE
MOUNTING | XR9 RECEIVER | |
INSTALLED | ||
PLATE SWUNG | ||
| ||
OUT |
|
7 of 16