Using Your inno Alone
3.To edit an existing session, select XM ➝ Record ➝ Schedule Recording. You will see a list of sessions. Highlight the session you wish to edit.
You may not see all the sessions that you scheduled in the past. Sessions that have expired are automatically removed from the list.
4.Choose Edit Session to change the session’s options.
5.To delete a session, choose Cancel Session.
At the scheduled time, your recording session will begin and change channels if needed. Remember that when you schedule a recording session, you are instructing inno to switch to the desired channel.
✍NOTE: Scheduled recording sessions will begin only if inno is put in a home dock or in a boombox with AC power. Your inno can be powered off or on. Make sure your inno can receive a strong XM signal!
Using Your inno Alone
Listening to Recorded XM Content
(My Music)
When you see “My Music” at the top of the display, you’re listening to XM content that you have recorded and any MP3/WMA files you have transferred to your inno.
1.To switch to “My Music” from “Live XM,” press the Mode button.
2.Press the up and down arrow buttons to view a list of songs that you have stored on inno. Highlight the song you want to listen to, then press XM ➝ Play to start playing from
that song.
3.You can press the right arrow button to skip to the next song. Press the left arrow button to skip to the previous song.
4.While you’re listening to a song, you can also press and hold the right arrow button to
✍NOTE: In order to access your XM content you have recorded on inno, you must (1) maintain an active XM Satellite Radio subscription, and (2) receive the live XM signal at least
8hours a month.
36 | Using Your inno Alone | Using Your inno Alone 37 |