iD38 Quick Start
1: Power | 2: Setting Clock with AutoSync |
TEST |
TEST |
Attach AC adaptor cable to DC jack on back of the unit and plug the other end into a wall socket. Remove the backup battery pull tab from the battery compartment on the bottom of the unit.
Gently dock your iPad, iPhone or iPod into the 30 pin dock. The unit will attempt to autosync to the time on your iPad, iPhone or iPod. This process takes about 3 seconds.
3: Playing your | 4: Updating firmware |
iPad/iPhone/iPod |
|
Gently dock your iPad/iPhone/iPod into the 30 pin dock. The iPad/iPhone/iPod will charge while docked. Press
the Button on the unit to play your iPad/iPhone/ iPod.
For best performance, make sure to update the iD38 firmware. To do so, download the free iHome Set app from the App Store. Launch the app, scroll to “Search for update” and follow onscreen directions if an update is available. NOTE: Firmware updates require a 3G service or
Note: the iHome Set app is not covered in detail in this booklet. Please download the free iHome Set app from the App Store and review the Start Guide.
3