Quick start

1: power

2: antennas

3: inserts

RESET

TEST TEST

Tab

Slot

Uncoil AM antenna cable from

antenna frame and plug cable into

Select the dock insert for your

socket on back of unit. Hold base of

iPhone/iPod model from the

Attach AC adaptor cable to DC

AM antenna in one hand and bend

table below and place insert in

the outer frame around towards the

jack on back of the unit and plug

dock. To remove insert, place

base and snap tabs into open slot

the other end into a wall socket.

on base. Move antenna 12” away.

thumbnail in slot and gently pull

Extend FM antenna.

upwards.

NOTE: Inserts provide the best stability for your iPhone

iPod touch 2G

iPhone 4

nano 6G/touch 4G

or iPod. If you do not have an insert for your iPhone/iPod,

Use this insert

insert 16

insert 19

insert 20

you can safely dock it provided you always do so gently

and carefully. To purchse an insert visit

nano 6G

www.ihomeaudio.com or call iHome toll

free at

For this iPhone / iPod iPod touch 2G/3G

iPhone 4

iPod touch 4G

1-877-446-6301 to purchase one.

4: iPhone/

5: time sync

6: radio

iPod

Gently dock an iPhone or iPod into dock with proper insert (iPhone/iPod must not be in a skin or case). The iPhone/iPod will charge while docked. Press and release the Button to play your iPhone/iPod.

Dock your iPhone or iPod (see step 4). Press and release the Time Sync Button located on back of the unit. “TIME SYNC” will appear on the display, followed by “TIME UPDATED” upon successful syncing.

Press and release the Mode Button as needed to select AM/FM band. Press and release the + or - Button to tune in a station. See page 6 for program- ming presets.