iHome iH64 manual Quick Start Connections

Quick Start: Connections

1:connections 2:power3:inserts

Important: Turn off iH64 before connecting or disconncting speakers!

1.Power off iH64.

2.Connect the right speaker to the speaker jack on the back of main unit.

3.Connect the left speaker to the speaker jack on the back of right speaker.

Attach the AC adaptor cable to the jack on the back of the main unit and plug the other end into a working wall socket.

Select the dock insert for your iPod model from the table below and place insert in dock.

Never dock an iPod without an insert in place.

Use this insert	thin iPod with video (30 GB)	iPod with video (60,80 GB)	3rd Gen nano	iPod Touch
	Insert 9	Insert 10	insert 13	insert 14
For this iPod	thin (30 GB) iPod with video	thick (60, 80 GB) iPod with video	3rd Gen nano	iPod Touch
	thin (80GB) iPod classic	thick (160 GB) iPod classic

NOTE: If the insert for your iPod isn’t listed, please visit an Apple store or www.ihomeaudio.com

to purchase the proper insert.

4:iPod	Insert iPod into dock with		5:batteries	For portable operation,
				remove	the	battery
	proper insert (iPod	must		compartment door on the
	not be in a skin or case).
				bottom of the main unit
	iPod will charge	while
				and insert 4 AAA batteries
	docked.
				(match + and - polarity to
	Press the Power button
				diagram in compartment).
	on the iH64 then press
				Replace	door. Will not
	play/pause button on your
				charge	iPod	when
	iPod to play the iPod.
				operating on batteries.

1