Magnavox mcr140 Controls, SET Time /ALARM OFF, OFF/ ON/ AUTO/ Buzz, Sleep, Clock Memory Backup

Page 3

English

CONTROLS

Top View (see fig. 1 )

1SET TIME /ALARM OFF

-sets the clock time

-stops the active alarm for 24 hours

-switches off the radio sleep function

2 SET ALARM 1 / SET ALARM 2 - sets the alarm time for alarm 1 / alarm 2

3AL1/ AL2 /AL1+2 - selects which alarm(s) you want to set alarm time on

4 REPEAT ALARM - switches off the active alarm for a 7-8 minutes period

5 OFF/ ON/ AUTO/ BUZZ

OFF: switches off the radio/alarm

ON: switches on the radio

AUTO: activates the radio for alarm

BUZZ: activates the buzzer for alarm

6 TIME SET 3 - to adjust time fast forward 7 TIME SET 4 - to adjust time back

8 SLEEP

-activates the radio for sleep function

-adjusts the sleep period

Front View (see fig. 2 )

9ALARM 1 indicator - lights up when alarm 1 is activated.

0 ALARM 2 indicator - lights up when alarm 2 is activated.

! DISPLAY - shows the clock/alarm time and status of the setting

@ Frequency pointer - shows the radio frequency of your selected waveband

# PM indicator -lights up when time is PM.

CLOCK MEMORY BACKUP

The clock memory backup allows your alarm and clock time settings to be stored for up to a day when there is a power interruption e.g. power failure. The com- plete clock radio and display illumination will be switched off. As soon as the power supply returns, the display will indicate the correct time.

1Remove the battery door to insert a 9 volts 6F22 type battery (not included) for backup.

2Replace the battery door.

NOTE: If no backup battery is installed or the power interruption is prolonged, you will need to set the clock and alarm times again.

Batteries contain chemical substances so they should be disposed of properly.

Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2W

RADIO

You can use this set solely as a radio!

1Adjust OFF/ ON/ AUTO/ BUZZ to ON to switch on the radio.

2Select your waveband by adjusting the FM/AM switch.

3Adjust TUNING to tune to your desired station.

4Turn the VOLUME control to adjust the volume level.

5Adjust OFF/ ON/ AUTO/ BUZZ to OFF to switch off the radio.

To improve reception:

FM: use the antenna built in the power cord. Adjust the position of the power cord for optimum reception.

AM: uses a built-in antenna inside the set. Direct the antenna by adjust- ing the position of your set.

Back View (see fig. 3 )

$Battery door - opens to store a 9 volts 6F22 battery (not included) for clock memory backup.

%TUNING - tunes to radio stations ^ FM/AM - selects FM/AM waveband

& BRIGHTNESS (High or Low) -selects display brightness * Power cord - for power supply and to improve FM reception ( VOLUME - adjusts the sound level

INSTALLATION

POWER SUPPLY

1Check if the power supply, as shown on the type plate located on the bot- tom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center.

2Connect the power cord to the wall outlet.

3To disconnect the set from the power supply completely, remove the plug from the wall outlet.

SELECTING DISPLAY BRIGHTNESS

This set allows you to choose high or low brightness of display.

Adjust BRIGHTNESS switch (located on the rear of the set) to HIGH or LOW position.

SETTING THE CLOCK TIME

The time is displayed using the 12-hour clock with PM indicator (PM off = AM).

1Hold down SET TIME/ALARM OFF.

2Press TIME SET 3 or 4 repeatedly, or hold down TIME SET 3 or 4 to adjust minute and/or hour.

-TIME SET 3 : to adjust time fast forward

-TIME SET 4 : to adjsut time back

3Release SET TIME/ALARM OFF and TIME SET 3 or 4 when you reach the correct setting.

The set clock time will show on the display and start to run.

USING THE ALARM

This set allows you to set one alarm (alarm 1 or alarm 2), or set two alarms simultaneously. This set also offers you two alarm modes: Auto (radio) and Buzz.

SETTING THE ALARM TIME

1Hold down SET ALARM 1 or SET ALARM 2

2Press TIME SET 3 or 4 repeatedly, or hold down TIME SET 3 or 4 to adjust minute and/or hour.

3Release SET ALARM 1 or SET ALARM 2, and TIME SET 3 or 4 when you reach the desired time setting. The display will return to the clock time.

SELECTING THE ALARM MODE

1Adjust AL1/AL2/AL1+2 to AL1 (alarm 1), or AL2 (alarm 2), or AL1+2 (alarm 1 + alarm 2) .

2Select your choice of alarm mode by adjusting OFF/ ON/ AUTO/ BUZZ to AUTO or BUZZ.

The corresponding alarm indicator(s) will light up.

Helpful Hint:

If you have selected the radio mode, make sure you have adjusted the volume loud enough to wake you.

The buzzer is set at a fixed volume and cannot be adjusted.

Image 3
Contents MCR140 Clock Radio INSIDE. Refer Servicing to Qualified Service PersonnelEL 6475-E005 04/01 Important Safety InstructionsSetting the Clock Time SET Time /ALARM OFFClock Memory Backup Installation Power SupplyRepeat Alarm Switching OFF the AlarmHour Alarm Reset Canceling the Alarm CompletelyCoverage Proof of Purchase

mcr140 specifications

The Magnavox MCR140 is a compact and versatile music system that exemplifies the brand's long-standing commitment to quality and innovation. This model, which combines various functionalities into a single unit, offers a user-friendly experience as well as a range of features that cater to diverse listening preferences.

One of the standout features of the MCR140 is its CD player, which supports standard audio CDs as well as CD-R and CD-RW formats. This makes it possible for users to enjoy a library of music, including their own recordings. The device also supports MP3 playback, making it ideal for those who have digitized their music collections. This modern approach to music playback ensures that users can access their favorite tracks with ease.

In addition to the CD player, the MCR140 is equipped with FM/AM radio capabilities. This feature allows users to tune in to their favorite radio stations, providing an alternative source of entertainment. The system includes a built-in tuner and a telescopic antenna that enhances reception quality, ensuring clear sound without interference.

Another notable characteristic of the Magnavox MCR140 is its Bluetooth connectivity. This technology enables users to wirelessly stream music from their smartphones, tablets, or other Bluetooth-enabled devices. The convenience of wireless streaming allows users to enjoy their favorite playlists without the hassle of cables, adding to the system's versatility.

The design of the MCR140 is both stylish and functional. Its compact size makes it suitable for various settings, whether in a living room, bedroom, or office. The aesthetically pleasing finish complements any décor, while the simple interface with intuitive buttons makes operation straightforward for users of all ages.

Sound quality is also a key focus of the MCR140. The system is equipped with stereo speakers that deliver clear and balanced audio, ensuring an enjoyable listening experience. Users can also adjust sound settings to fit their preferences, allowing for customization based on the type of music being played.

Overall, the Magnavox MCR140 is a well-rounded music system that offers a combination of traditional and modern playback options, ensuring it meets the needs of a broad audience. Its integration of various technologies, such as CD playback, FM/AM radio, and Bluetooth streaming, along with its elegant design and high-quality sound, makes it a valuable addition to any home entertainment setup. Whether for personal enjoyment or social gatherings, the MCR140 delivers a reliable and enjoyable music experience.