Roberts Radio MP-SOUND 43 manual Presetting stations, Recalling a preset station

Presetting stations

You may store your preferred DAB and FM radio stations to the preset station memories (1 to 10). The procedure for setting presets and using them to tune stations is the same for FM and DAB modes, and is described below. Note that the radio stores FM and DAB presets separately and so there are ten of each. Presets are preserved in the event of a power failure.

1.Press the On / Standby button to switch on your sound system.

2.Tune to the required station as previously described.

3.Press and hold down the required Preset button (1 to 10) until the display shows for example "Preset 1 saved". The station will be stored using the chosen preset number. Repeat this procedure for the remaining presets as you wish.

4.Preset memories which have already been stored may be overwritten by following the above procedure if required.

Recalling a preset station

1.Press the On / Standby button to switch on your sound system.

2.Select the required waveband by pressing the Radio button.

3.Momentarily press the required Preset button (1-10) to cause your radio to tune to the station stored in preset memory.

Note: If you have not previously stored a preset station and the preset button is pressed "Empty preset" will be displayed.

1

2

3

DAB

3

22