Roberts Radio CRD-19 manual Using the clock radio for the first time

Page 5

Using the clock radio for the first time

Your clock radio is supplied with a Mains Adaptor.

1.Place your clock radio on a fl at surface.

2.Insert the adaptor plug into the DC socket located on the rear of your clock radio.

3.Fully extend the wire aerial located on the rear of your clock radio. The wire should be fully extended and positioned for optimum reception.

4.Plug the adaptor into a standard 13 amp mains socket outlet.

5.When your clock radio is fi rst switched on the display will show "DAB Digital Radio" then "Clock setting" and a station search will be per- formed automatically.

6.When stations have been found, the clock information will appear on the display.

7.If no stations have been found "0 Services Found" then "Service N/A" will be displayed. It may then be necessary to relocate your clock radio to a position giving better reception. You should then carry out an autoscan to fi nd stations as described on page 8.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

4

 

Image 5
Contents Roberts Contents Controls Top Controls rear Controls left hand sideUsing the clock radio for the first time Operating your clock radio Selecting a station Secondary servicesDisplay modes Finding new stations Autoselect Manual tuning Presetting stations Signal strength displayClassic FM button Recalling a preset stationSetting the alarm time 7,9 Snooze function To view alarm timeCancelling alarms Sleep function System reset Software version Display backlight Clock displayDisplay Dimmer Line out socket Headphone socketFitting a telescopic aerial not supplied Line in socket 3.5mm JackPower Requirements Specifications Circuit FeaturesGeneral Page Guarantee Roberts Radio Technical Services