Roberts Radio CR9936 manual Listening to the Radio

Page 6

Listening to the Radio

1.Switch on your CD clock radio by pressing the On/Off button. The On indicator LED will light.

2.Slide the Function switch to the required waveband.

3.Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale.

The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.

For MW reception there is a built in ferrite aerial. Rotate your CD clock radio to the position giving best reception.

4.Adjust the volume by rotating the Volume control.

5.When listening to FM stereo stations (Function switch in FM St. position) and the station being received is weak, some hiss may be audible. To reduce the hiss slide the Function switch to the FM position. The stereo indicator will switch off and reception will be in continue in mono.

6.The radio can be switched off by pressing the On/Off button. The On indicator will switch off.

1

2

3

45

6

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CR9936 Contents Controls Controls Switching on and setting the time Listening to the Radio Compact discs CD-R/CD-RWdiscsInserting a CD Playing a CD Selecting a track Search functionCD repeat mode CD Random playProgrammed play Checking a programmeErasing a programme Setting alarm times Setting alarmChecking the Alarm Times Setting the alarms to wake to buzzer Setting the alarms to wake to radio Setting the alarms to wake to CD Setting the alarm to wake to CD programme Press the Play button followed by the CD Stop buttonSleep timer Snooze controlHeadphones Auto DimmerNight light Specifications Circuit Features Power RequirementsMains supply Back-up Battery not necessary for the unit to functionGeneral FuseGuarantee Roberts Radio Technical Services
Top Page Image Contents