Roberts Radio CR9946 manual Changing the backup battery

Page 21

Changing the backup battery

1.Purchase a replacement lithium backup battery type CR2032 or equivalent.

2.Remove the fresh battery from its packaging so that it is ready to install.

3.Important. Maintain connection to AC mains supply during battery replacement. This will provide power whilst the original battery is removed.

4.Remove battery door by sliding catch in direction of shown.

5.Use a small screwdriver to remove the small screw securing the battery holder inside cabinet.

6.Remove the battery holder from cabinet.

7.Remove old battery from holder. Replace new battery with + sign facing left side of your CD clock radio when viewed from under side and cabinet rear.

8.Replace the holder inside cabinet.

9.Refit the small screw to secure holder and check that the “Batt Low” indicator is not lit.

10.Replace the battery door.

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri)

4

5

7

20

cr9946 instruction book.PMD

21

4/19/2004, 4:49 PM

Page 20 Page 22
Image 21
Page 20 Page 22
Contents CR9946 Contents Controls Controls Setting the time Switching onSetting the date Setting the yearChecking the date Checking the yearSetting alarm times Setting alarmSetting alarm Setting the alarm mode Checking the Alarm Times Listening to the Radio Inserting a CD Compact discsPlaying a CD CD repeat mode Selecting a trackSearch function CD random play CD ModeProgrammed play Checking a programmeErasing a programme Setting the alarms to wake to radio Setting the alarms to wake to buzzerSetting the alarms to wake to CD Snooze control Sleep timerBackup battery HeadphonesChanging the backup battery Specifications Circuit FeaturesTime Zones General Mains supplyFuse Roberts Radio Technical Services
Top Page Image Contents