Roberts Radio CR9945 manual Switching on, Setting the time

Switching on

1.Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on.

2.After a few seconds the time, day and date will set automatically. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your clock radio will automatically adjust for summer/winter time.

See section on Backup battery on pages 12 and 13.

Should the time require adjustment follow the procedure shown in the next section.

Setting the time

1.Press and hold down the Time button.

2.Whilst holding down the Time Set button press the Up or Down buttons to set the time. Release the buttons when the correct time is reached. The clock uses a 12 hour display with an AM indicator. Ensure that the correct 12 hour cycle is selected.