Roberts Radio CR9934 manual Pre-setting stations

Page 12

Pre-setting stations

You may store up to 10 different stations on FM and 5 for MW giving a total of 15 preset stations.

1.Switch on your radio using the On/Off button.

2.Select the desired waveband using the Band button.

3.Tune into the required station using one of the tuning methods previously described.

4.Press and release the Memo button, 'M' will flash in the display.

5.Whilst 'M' is flashing press one of the Preset buttons under which you wish to store the station. Presets 6 to 10 are obtained by pressing the Preset button twice.

6.Press the Memo button to store the station. The preset number will now appear under 'Memory' in the display.

7.Repeat the above procedure for the remaining presets

8.Press the On/Off button to switch off your radio.

Note: Pre-setting of stations can only be carried out whilst 'M' is flashing in the display (8 seconds).

12

4

5

6

8

11

Image 12
Contents CR9934 Contents Controls Top Controls Left side Right side Display Connecting to mains supply Night lightDisplay backlight Setting the clock Setting the day of weekSetting the alarm times Displaying the alarm timeWake to buzzer Sleep timer Wake to radioSnooze control Weekend alarm cancel Operating your radio search tuningOperating your radio manual tuning Pre-setting stations Recalling a preset station Reset buttonLast station memory Headphones Specifications Circuit FeaturesBack-up battery not necessary for the unit to function GeneralMains supply FuseRoberts Radio Technical Services Department