Roberts Radio CR9932 manual Listening to the Radio

Page 5

Listening to the Radio

1.Turn on the radio by sliding the Function switch to the 'On ' position. The LED dial pointer will light up indicating that the radio is switched on.

2.Select the required waveband using the Waveband selector switch.

3.Tune in to the desired station by rotating the Tuning control. The station frequency is indicated by the LED dial pointer.

The Wire aerial located on the rear of your clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.

For MW and LW reception there is a built-in ferrite aerial. Rotate your clock radio to the position giving best reception.

4.Adjust the volume by rotating the Volume control.

5.The radio can be switched off by sliding the Function switch to the 'Off ' position.

If you need any further advice, please call our Technical Helpline on :-

4

020 8758 0338 (Mon-Fri)

Image 5
Contents CR9932 Controls Top3 Left side Right side Controls Front Switching on and setting the time Listening to the Radio Checking the alarm time AlarmSetting the alarms to wake to radio Setting the alarm to wake to buzzerSnooze control Sleep timerDimmer Switch Night light Headphones on rearGeneral Back-up Battery not necessary for the unit to functionFuse Mains supplyPower Requirements Specifications Circuit FeaturesRoberts Radio Technical Services Guarantee