Roberts Radio CR9922 manual Snooze control, Sleep timer, Auto Dimmer, Headphones on rear

Page 9

Snooze control

The buzzer or radio alarm can be silenced for 7 minutes by pressing the Snooze button. This sequence can be repeated whilst the alarm is sounding.

Sleep timer

The radio can be set to switch off after a preset time has elapsed.

Press and hold down the Sleep button until the desired time is reached (maximum 59 minutes in 1 minute steps). The radio will switch off after the sleep time has elapsed.

To cancel the sleep function before the preset time has expired, press the Alarm/Off button.

Auto Dimmer

The Auto Dimmer located on the bottom right side of the LED display will automatically adjust the intensity of the clock display to suit room brightness. The display brightness can be further adjusted using the Display dimmer switch located on the left side of your clock radio.

Headphones (on rear)

A Headphone Socket (3.5mm) is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

8

 

Image 9
Contents CR9922 Controls Controls Switching on and setting the time Listening to the Radio Setting alarm Setting alarm timesChecking the Alarm Times Setting the alarms to wake to buzzer Headphones on rear Sleep timerSnooze control Auto DimmerGeneral Back-up Battery not necessary for the unit to functionMains supply FusePower Requirements Specifications Circuit FeaturesRoberts Radio Technical Services Department