Snooze control
The radio or buzzer alarm can be silenced for
|
| m |
Time | Set | Alar |
|
|
Sleep timer
The radio can be set to turn off after a preset time has elapsed.
Press and hold down the Sleep button until the desired time is reached (maximum 59 minutes in 1 minute steps). The radio will switch off after the sleep time has elapsed.
The radio can be turned off at any time by pressing theRadio/Alarm/Sleep Off button
S. |
|
|
Rev | S. Fwd | |
|
| |
R |
| Off |
adio On |
| |
| Radio/ | |
|
| Alarm/Sleep |
| ze |
Snoo | |
F. Fwd |
|
| 1 |
| 2 |
Sleep |
|
S. |
|
Rev | S. Fwd |
| |
PM
F. Fwd
Radio On
Auto Dimmer
The Auto Dimmer located on the top left side of the LED display will automatically adjust the intensity of the clock display to suit room brightness.
Auto 
1
Dimmer
2
R
Off adio/ Alarm/Sleep
Sleep
PM
Battery Back-up facility (see page 9)
The purpose of this battery is only to store information relating to the alarm times and to keep the clock functioning in case of disconnection from the mains supply or power interruption. Should this occur the clock will continue to run. The time and alarm settings will be retained but the LED display will not be operational .
If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 | 8 |
|