Scan tuning
1.Switch on your radio by pressing the Power button .
2.Select the required waveband by pressing the Band button.
3.Press and hold down either the Tuning + or - buttons until the frequency in the display begins to change rapidly. Release the button. Your radio will scan the selected waveband and stop automatically when it finds a station of sufficient strength.
4.Adjust the Volume control to the required setting.
5.Press and hold down either the Tuning + or - buttons for more than half a second to resume scan tuning. When the waveband end is reached your radio will continue tuning from the opposite waveband end.
Manual tuning
1.Switch on your radio by pressing the Power button.
2.Select the required waveband by pressing the Band button.
3.The required station may be selected by repeatedly pressing either the Tuning + or - buttons.
4.Adjust the Volume control to the required setting.
5.When the waveband end is reached your radio will continue tuning from the opposite waveband end.
13