Roberts Radio RD-25 manual Operating your radio DAB

Page 7

Operating your radio - DAB

1.Carefully extend the telescopic aerial.

2.Press the On/Off button to switch on your radio. The display will show "Welcome to Digital Radio" for a few seconds.

3.If this is the fi rst time the radio is used a quick scan of UK Band III DAB channels will be carried out. The display will show "Now tuning". If the radio has been used before the last used station will be selected.

4.During Autotune, the display will show "Scanning" and as each group of stations is detected the station count will be updated. The bottom line of the display shows a bargraph indicating progress of the Auto- tune.

5.When the Autotune is completed the fi rst station (in numeric-alpha order 0...9...A....Z) will be selected.

6.If the station list is still empty after the Autotune your radio will display "No signal".

7.If no signals are found it may be necessary to relocate your radio to a position giving better reception.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

2

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Roberts Contents Controls Controls rear Controls Left hand side Right hand side DC socket Rotary tuning controlUsing the AC adaptor Battery operationOperating your radio DAB Selecting a station DAB Secondary services DABDisplay modes DAB Finding new stations DAB Manual tuning DABPresetting stations DAB Signal strength display DABStation order setup DAB Recalling a preset station DABPrune stations Favourite stationsAlphanumeric Active stationSoftware version Dynamic Range Control DRC settingsOperating your radio Search tuning FM and MW Manual tuning FM and MW Display modes FM Recalling a preset station FM and MW Presetting stations FM and MWFM Stereo/Mono Sleep function Display backlight System resetLine out socket Auxiliary in socketHeadphone socket Specifications Circuit features Spatial sound switchGeneral Guarantee
Top Page Image Contents