Philips FW585C manual Selecting a desired track, Programming Tracks, Reviewing the program

Page 17

Selecting a desired track

Selecting a desired track when playback is stopped

1Press PREV ’or NEXT ‘until the desired track appears on the display.

2Press PLAY ƒto start playback.

ªThe selected track number and elapsed playing time appear on the display.

Selecting a desired track during playback

Programming Tracks

Programming tracks of a loaded CD is possible when playback is stopped. The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show “FULL”.

1

Load the desired discs in the disc trays.

2

Press PROGRAM to start programming.

–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.

Reviewing the program

Reviewing of the program is possible only when playback is stopped.

•Press PREV ’or NEXT ‘repeatedly to review the programmed tracks.

•Press STOP•CLEAR ‚to exit review mode.

CD

Notes:

–If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.

–REPEAT DISC mode will be cancelled when program playback begins.

English

•Press PREV ’or NEXT ‘until the desired track appears on the display.

ªThe selected track number and elapsed playing time appear on the display.

•If you press PREV’once it will skip to the beginning of the current track and play the track again.

Searching for a particular passage during playback

•Press and hold ˆor ‡until the desired passage is located.

ª The volume will be reduced.

•Play returns to normal when ˆor ‡ is released.

 

ª The PROGRAM flag starts flashing.

 

ª It will cancel any previously selected

 

repeat mode.

3

Press the CD (CD 1•2•3) button to

 

select the disc.

4

Press PREV ’or NEXT ‘to select

 

the desired track.

5

Press PROGRAM to store the track.

• Repeat steps 3 to 5 to store other discs and tracks.

6Press STOP•CLEAR ‚once to end programming.

ªThe total number of tracks programmed and total playing time appear on the display.

Notes:

–If the total playing time is more than

“99:59” or if one of the programmed tracks has a number greater than 30, then “--:--” appears on the display instead of the total playing time.

Playing the program

1Press PLAY ƒto start program playback.

ª“PLAY PROGRAM” appears on the display.

ªThe track number and elapsed playing time of the current track will

appear on the display.

•If you press REPEAT during program playback, the current track will be played repeatedly.

ªThe REPEAT and PROGRAM flags will be displayed.

2Press STOP•CLEAR ‚to stop program playback.

Erasing the program (when

playback is stopped)

•Press STOP•CLEAR ‚.

ª“PROGRAM CLEARED” will be displayed.

Note:

–The program will be erased when the system is disconnected from the power supply or when the CD carousel is opened. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show “TRACKS CLEARED”.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents FW585C Which you should read the enclosed literature closely to For Customer UseDear Philips Magnavox product owner Congratulations on your purchase, and welcome to the familyAny kind of contact with any inside part of this unit Set complies with the FCC-Rules, Part 15 and with 21 CFRClass Laser Product Safety Instructions Read before operating equipment Safety Instructions WHO is COVERED? Audio SystemContents Rear Connections PreparationFM Wire Antenna Connection Inserting batteries into the Remote ControlConnecting other Equipment to your system AC Power SupplyClock ControlsControls on the system and remote control Operating the System To switch off DBB For neutral setting, select Classic and switch off DBBSelecting the Equalizer Display Sound ControlPlaying a CD Loading the CD ChangerDisc Change Disc for playbackProgramming Tracks Selecting a desired trackReviewing the program Playing the programAutomatic programming Tuning to radio stationsStoring Preset Stations You can cancel the automatic Tuning to Preset Radio StationsTuner Manual programmingLoading a tape TapeTape Playback Auto Reverse Playback only onThere are two AUX modes Normal AUX mode Store the tapes at room temperatureAUX/CDR During playbackRecording Only Œ or ¶ mode is available during recordingRecording from other sources Only on tape deckOne Touch Recording CD Synchro Start RecordingDigital Recording via Digital Out Dubbing will start immediatelyTimer Setting TimerClock Setting ClockMaintenance Timer Sleep Timer MaintenanceSpecifications SpecificationsRadio Reception CD Player OperationTape Deck Operation General

FW585C specifications

The Philips FW585C is a compact and versatile audio system that combines modern technology with a classic design, making it an excellent choice for music enthusiasts. This home audio system is notable for its robust features, including powerful speakers, an integrated CD player, and advanced connectivity options.

One of the standout features of the FW585C is its remarkable sound quality. Equipped with a built-in 5-Watt amplifier and high-performance speakers, the system delivers clear and resonant audio across various frequencies. The bass response is particularly impressive, thanks to the carefully engineered sound design, enhancing the overall listening experience, especially for genres like rock, hip-hop, and electronic music.

The FW585C also includes a multi-disc CD player that can handle multiple formats, allowing users to enjoy their favorite albums in various forms. The inclusion of a digital tuner expands listening options, providing access to various radio stations. Additionally, the system supports automatic programming for easy access to the most-wanted channels.

In terms of connectivity, the Philips FW585C offers multiple input options, including USB ports and an auxiliary input. This makes it easy to connect external devices such as smartphones, tablets, or computers for seamless playback. Users can stream their favorite playlist directly from their devices, which is a convenient feature for those who prefer digital music libraries.

The design of the FW585C is both stylish and functional. Its sleek and compact form allows it to fit in various spaces, whether on a shelf, desk, or entertainment center. The user-friendly interface includes an easy-to-read display and intuitive controls, making navigation hassle-free for everyone.

Another notable characteristic is the durability of the system. Philips has a reputation for high-quality audio equipment, and the FW585C stands as a testament to that legacy. It's built to withstand daily use while delivering consistently high performance.

Overall, the Philips FW585C is an attractive audio solution for anyone seeking quality sound, modern connectivity, and ease of use in a compact design. As technology continues to evolve, this system remains a relevant option for both casual listeners and dedicated audiophiles alike.
Top Page Image Contents