Setting the standby time
Ensure that the receiver is switched off. Press the mode button (5) once, the STANDBY symbol in the display will start to flash.
Press and hold down the mode button (5) until the STANDBY symbol and the time shown in the display begin to flash. Release the mode button. You now have 5 seconds to start the next procedure otherwise the display will stop flashing and return to showing normal time.
While the display is flashing use the tuning up button (12) to adjust the minutes and the tuning down button (15) to adjust the hours. After approx. 5 seconds the display will stop flashing and return to a normal time display. The time is displayed in 24 hour format.
Waking up to the bleeper
Set the standby time as previously described. Set the standby switch (21) to the 'bleep' position. Press the standby button (4) until the STANDBY 
symbol is shown in the display.
When the standby time is reached the bleeper will sound. The bleeper will continue to sound for approx. 59 minutes or until the power button (14) is pressed. The standby time (alarm) can be permanently switched on or off
by pressing the standby button (4). When the STANDBY | symbol is |
visible in the display, the standby time (alarm) is active. |
|
Waking up to the radio
Set the standby time as previously described. Tune the radio to the required station and set the volume level. Set the standby switch (21) to the 'radio'
position. Press the standby button (4) until the |
|
| STANDBY symbol is |
|
| ||
shown in the display. |
|
|
|
|
|
|
When the standby time is reached the radio will turn on and will continue to operate for approx. 59 minutes or until the power button (14) is pressed.
The standby time (alarm) can be permanently switched on or off by pressing
the standby button (4). When the |
|
|
| STANDBY symbol is visible in the |
|
|
| ||
|
|
|
|
|
display, the standby time (alarm) is active. |
| |||
STANDBY
STANDBY
6