Sanyo DC-MX40i instruction manual AUX in Play, To SET Sleep FUNCTIONon the remote control

Page 14

AUX IN PLAY

1.Use a cable with RCA jack to connect external audio source (DVD player, Mini Disc player, Cassette Deck etc.) to the AUX IN jack on the rear of the unit.

2.Press the FUNCTION button repeatedly until the “AUX” appears on the display.

3.Turn your auxiliary source “ON” and operate it as usual. The sound from the auxiliary source will be heard through the speakers of the unit.

Note: Aux in cable not included.

TO SET SLEEP FUNCTION(on the remote control)

1.If you want to fall asleep with music, press the SLEEP button.(F24) F24

2.Press SLEEP button repeatedly to change and select from 90 to 80, 70, 60, 50, 40, 30, 20, 10 minutes. You may select the TUNER, CD, USB, CARD or IPOD mode in sleep function.

3.After the unit plays for your selected time, it will shut down automatically. While the SLEEP function is activated, press SLEEP button once and the remained sleep time will be shown. Press SLEEP button again to select another sleep time.

EQ CONTROL(on the remote control)

EQ shows the present sound tone.

When you press the EQ button, the sound tone changes as below:

MUTE SETTING(on the remote control)

1.When you press the MUTE button once on the remote control, the volume level will flash and the audio output will be temporarily terminated.(F24)

2.Press the MUTE button again, the volume level and the audio output will return to normal.

F24

LISTEN TO THE MUSIC BY USING HEADPHONE

A stereo headphone jack is provided for private listening. To listen to the unit with headphones (not included) insert the 3.5mm mini-stereo plug into the PHONES jack on the front panel. The external speakers are automatically disconnected when headphones are using.

12

Image 14
Contents DC-MX40i Table of Contents Safety Precautions Important NotesClass 1 Laser Product Features and Controls Remote Control LCD Display WindowOperating the Unit Putting the Batteries Into the Remote Control UnitInstalling the Speaker Wire to the Speaker Terminals STANDBY/ONFunction Select Clock SettingTimer Setting Radio OperationCD/MP3/WMA Operation During in the Standby mode ID3 Operation on the remote controlDuring in the MP3/WMA mode USB/SD Card OperationProgramme Repeat Play FUNCTIONon the remote controlProgram Function Important InformationsCancel Program Random PLAYon the remote controlIntro PLAYon the remote control Program PlayDuring the unit in Standby mode Mute SETTINGon the remote control To SET Sleep FUNCTIONon the remote controlEQ CONTROLon the remote control Listen to the Music by Using HeadphoneCompact Disc Compact Disc Section SpecificationMaintenance Trouble Shooting Symptom Possible Cause Corrective ActionUnit supports the listed iPods Code NO.116403062