iPhone/iPod and Radio
Docking an iPhone/iPod
1 Press the POWER button to turn the bar speaker on.
2 Press the SOURCE button to switch to iPhone/iPod mode. (iPod button on the remote)
3 Press the iPod DRAWER button to open the MOTORIZED DOCK FOR iPhone/iPod.
4 Locate the numbered bracket that fits the iPhone/iPod model that will be docked.
Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.
5 Snap the bracket into place over the iPhone/iPod connector in the motorized dock.
6 Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod.
When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge.
Playing an iPhone/iPod
1 Follow the instructions for docking an iPhone/iPod.
2 Press the PLAY/PAUSE button to begin playing music from the docked iPhone or iPod.
Tuning the FM Radio
1 Press the POWER button to turn the bar speaker on.
2 Press the SOURCE button to switch to FM radio mode.
3 Press the SKIP/TUNE buttons on the remote to tune the FM radio.
Saving a Station as a Preset
1 Follow the instructions for TUNING THE FM RADIO.
2 Press the MEM button.
3 Press the MENU UP/DOWN for iPod buttons to select a preset. (P01, P02, P03, etc.)
4 After you’ve selected a preset, press the MEM button to save the current FM radio station to the selected preset.
Tuning to a Preset FM Radio Station
1 Follow the instructions for TUNING THE FM RADIO.
2 Follow the instructions for SAVING A STATION AS A PRESET.
3 Press the MEMORY buttons on the remote to cycle through preset radio stations.
10 iLive ITP280B