Automatic Time Set
1.When the unit is plugged in to a standard AC Outlet (120V~60Hz) for the first time, it will automatically begin searching for the time.
The letters “CT” will flash on the LCD display to indicate that the unit is search- ing for the time.
If the letters “CT” do not appear on the LCD Display, press and hold the Standby/ AL Off/Reset Button for 5 seconds to reset the unit
2.To cancel the automatic time set during the search, press the Standby/AL Off/ Reset Button. To resume the automatic time set, press and hold the Standby/AL Off/Reset Button for 5 seconds to reset the unit.
3.A time zone will appear on the LCD Display. If the time zone is incorrect, press the /HR/MIN/Tuner/ Buttons change the time zone.
4.Once the correct time zone is selected, press the CLK SET Button to set the time.
The unit will update the time daily.
Manually Setting the Time
1Turn the unit off by pressing the
Standby/AL Off/Reset Button.
2Press and hold the MEM/CLK Set Button.
The hour of the time will begin to blink, indicating it can be changed.
3Press the /HR/MIN/Tuner/ Buttons to adjust the blinking hour.
4Press the MEM/CLK Set Button.
The minute of the time will begin to blink, indicating it can be changed.
5Press the /HR/MIN/Tuner/ Buttons to adjust the blinking minute.
6Press the MEM/CLK Set Button.
AM Time Indicator
STANDBY
AL OFF/
RESET