Playback and A-B Selection, ↔ B Section Repeat Play

PLAYBACK and A-B SELECTION:

Select the track you wish to listen to, press the PLAY button to begin playback. If you wish to hear a certain portion of the pro- gram material repeated; begin playing the track, when the material reaches the beginning of the part you want repeated, press the A-B button once. When the material reaches the ending of the part you want repeated, press the A-B button again. This portion of the material will then playback repeated continuously until either the A-B button is pressed again, or the STOP button is pressed. As described below.

A↔ B: Section Repeat Play

Press once to start playing the beginning of selection.

Press again to stop at the end of selected area. The device repeats to play selected material.

Press it again to stop playing. LCD display A↔ B will be disappeared from the LCD display.

Deleteing current playing track

Press DEL button, LCD display flashes DEL FILE, reminding you to delete the file, press DEL again to confirm the deletion, LCD display shows DEL END.

Delete all the ﬁles: In the stop-play mode operation.

-Press the Stop button

-Press DEL key for over 5 seconds.

-LCD display shows “DEL ALL” to confirm whether you want to delete all the files.

-Then press DEL key again to delete all the files.

-To cancel delete function, just wait for LCD to stop flashing and cancellation of delete all function.

IF THERE ARE MULTIPLE FOLDERS IN MEMORY THE DE- LETE ALL FUNCTION WILL NOT WORK. YOU MUST DE- LETE ITEMS ONE AT A TIME.

REAR PANEL

	LINE	12 VDC	STEREO	MODEL HR73
	INPUTS	12 VDC	OUTPUTS	MODEL HR73
MADE IN USA				SERIAL NUMBER
MADE IN USA	R		R
www.rolls.com	R		R
		+
	L	-	L

•LINE INPUTS: Two RCA (stereo) line level Input jacks.

•Power Jack: Connects to the enclosed Rolls Power Adapter.

• Stereo Outputs:	RCA: Unbalanced RCA outputs.
	1/8" (3.5mm): Stereo Line/Headphone Output

Recording

REC: Recording function key, record through the Line-in channel

When USB and SD Card are both in the device :

-Press the REC button. LCD display flashing to indicate will be recorded to USB or SD.

-Use USB / SD button to select the option to record to USB or SD card.

-Press REC again to start to record, LCD starts flashing to indicated that recording has started. (this is not a signal indicator)

-Press STOP button to stop recording.

When only single USB or SD Card in the device

-Press REC to begin recording, LCD flashes to indicate recording has started. Press STOP button to stop recording.

Recorded tracks are saved in the last folder of the USB or SD card called "RECORD/LINE IN" folder. The track number in the REC Folder will start from “ REC 001 “, and increase gradually. To Play recorded tracks, simply press PLAY under REC folder.