Alternate Mounting Methods

The mounting plate can be removed allowing the SCC1C to be mounted directly to a surface using either double stick tape, Velcro or other adhesive material. Simply remove the 2 screws on the bottom of the SCC1C tuner to remove the bracket as in Figure 3 below. If using adhesive material, avoid covering the SID label.

Figure 3

Combining with a SiriusConnect Interface device

Some third-party interfaces are designed with the same asymmetrical chassis as the SCC1C. To connect the units together, simply remove the mounting brackets from each unit, rotate them 90° and connect as show in Figures 4 and 5 below

SiriusConnect

Interface

SCC1C Tuner

Figure 4

Figure 5

[ Installation ] 11