Sirius Satellite Radio SP-C1 manual Installation in a Vehiclepanel, Connecting to your Car Stereo

good visibility of and access to the SP-R1 Receiver’s front

Installation in a Vehiclepanel.

• It is strongly recommended that you mount the SP-R1 Receiver using the provided Adhesive Mount. For best adhesion, the mounting surface should be as flat as possible.

• Use the 4 provided screws to attach the Adhesive Mount to the back plate of the cradle.

• Clean your selected area with the included surface preparation swab, remove the backing paper from the bottom of the adhesive mount and then firmly press the mount against the cleaned area.

2. Plug the car power adapter into the back of the Docking Station. Don’t plug the adapter into the cigarette lighter until the installation is completed.

Connecting to your Car Stereo

1.If your car stereo has an AUX input, plug the supplied audio cable into the back of the cradle. Plug the audio cable’s white (L ch) and red (R ch) connectors into your car stereo.

2.Alternatively, you can use the integrated FM transmitter to connect your Sportster Receiver. Please see the SP-R1 User Guide for more information on configuring the FM transmitter. Tune your car’s radio to the appropriate frequency to listen to the Receiver.

Sportster SP-C1 User Guide

5