Listening to the radio - FM
1.Set the Function switch to the 'Radio' position. The Power indicator will light up.
2.Select 'FM' using the Waveband switch.
3.Adjust the Volume control until a hissing sound is heard.
4.The Telescopic aerial which is only operational on FM, should be fully extended.
5.Carefully tune to the desired station using the Tuning control.
6.Angle and rotate the Telescopic aerial to a position giving the best reception. A knuckle joint at the base of the aerial allows this movement and an angle of 45 degrees will usually be satisfactory. The FM band is marked in Megahertz (MHz).
7.To receive stereo broadcasts set the FM mode switch located on the rear of your CD radio cassette to the 'Stereo' position the Stereo indicator will light up. If the station being received is weak some hiss may be audible, to reduce the hiss set the FM mode switch to the 'Mono' position to return to mono operation.
8.Adjust the Deep bass boost switch to the required position.
9.To switch off the radio set the Function switch to the 'Tape Off ' position.
F unctio n
Tape 
Ra dio | CD |
Volum e
On
Off
W aveba nd
M W
FM 
LW
Tuning
F unctio n
Tape 
Ra dio | CD |
7