Setting The Alarm Time And Alarm Mode (Buzzer/Radio/iPod)
NOTE: We suggest that you set the Alarm time with the power ‘On’and the Function set to the AUX mode. This will keep the display backlighting ‘On’and make the settings easier.
1.) Depress and hold the ALARM/PRESET UP button for 3 seconds. This display changes to wake up time and the Hour digits and the Buzzer
indicator 
begin to flash.
2.) While the hour digits are flashing press either
the 
/ 
or 
/ 
buttons to move the hour display back or forward to the correct wake up hour. Be sure to observe the AM/PM indicator to make sure you have set the wake up hour correctly.
3.) Press the ALARM/PRESET UP button again. The hour digits stop flashing and the minute digits begin to flash.
Press either the 
/ 
or 
/ 
buttons to move the display back or forward to the correct wake up minute.
4.) When the correct wake up time is showing on the display press the ALARM/PRESET UP button once more.
The minute digits stop flashing and the display returns to the current time, but the Buzzer
indicator 
remains in the display to show that the Alarm is ‘On’and set for the Buzzer mode.
24
iP105_052207.p65 | 24 |
22/5/2007, 11:37