TROUBLESHOOTING
Player is not recognized on my Windows® 98SE computer: Install the MP200 driver from the website. Connect the player to your computer and follow your operating system’s instructions to finish installing the driver. For more info visit our website: www.emersonradio. com .
If player is still not recognized, locate the Universal Serial Bus (USB) devices in your operating system’s device manager. If your MP200 displays a problem, follow your operating instruction’s directions for updating the device driver and load the driver from the website. For more info visit our website: www.emersonradio.com .
After transferring files to the player, music did not play or data was not present: Make sure music is in the MP3/WMA™ format. Follow your operating system’s instructions for safely disconnecting USB devices.
Buttons do not work/player does not power up: Make sure the HOLD switch is in the off position. Make sure the battery is in the correct position. Replace the battery with a new one if necessary.
No sound is heard through the headphones: Check the headphone connection and adjust the volume level.
23