Sharp MD-MT877 operation manual Operation, Basic, About sampling rate converter

Page 23

To prevent recorded MiniDiscs from be- ing erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow.

The MiniDisc will then be protected against accidental era- sure.

About sampling rate converter

This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape re- corders.

Note for digital recording

You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analog inputs is not affected.

Operation

Recording –

Recordable Recording prevented

To add a recording to such a MiniDisc, slide the ac- cidental erase prevention tab back to its original po- sition.

Helpful tip when attaching a label

When attaching a label to a MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.

● If the label peels off or partially lifts away, replace it with a new one.

●Do not put a new label on top of an existing one.

●Attach the label only in the specified location.

Digital signals

Digitally recorded

Cannot record

 

MiniDisc

 

CD player, MiniDisc player, etc.

DigitalDigital

connection connection

Basic

23

–

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Thank you for purchasing this Sharp product Portable Minidisc RecorderEarphones x AccessoriesOptional accessories Contents Special Notes Special NotesImportant Introduction Page Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesMain unit Names of Controls and IndicatorsColor LED Names of Controls and IndicatorsMain unit display panel DEUTSCH-Indicators Remote control unitRemote control display panel Names Battery ChargerSetting ImportantIntroductionFor use with the AC adaptor How to use the Charge / Operation switchSetting the battery charger and hanging the remote control RemovingUsing Using with the Rechargeable BatteryPowerSource WiththeRechargeableBatteryDischarged About the liquid crystal display LCDAbout charging time UsingwiththeACAdaptor Using with the AC AdaptorOpen the case cover Insert an alkaline battery into the batteryAttach the battery case to the portable MD Open PressHoldFunction To cancel the hold modeHold Function PreparationInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsSee left, Digital connection To an ACOutlet To a stereo system with a Digital OUT jackRecording Cancel the hold modeRecording Basic Operation+12 -12dB Press the REC buttonDigital recording To stop recording To update the recorded contents of the MiniDiscBasicOperation To interrupt recordingAbout sampling rate converter Helpful tip when attaching a labelOperation BasicRelease PlaybackPlayback Before Playing backTo stop playback To turn off the powerTo interrupt playback Bass control Volume controlTo locate the beginning of a track Useful FeaturesAdvanced Playback To locate the desired portionTo return to normal playback UsefulFeaturesAdvancedPlayback Intro playTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play Playback sound-actuated recording Synchronized recording Advanced RecordingAdvancedRecording Press the Enter button To start recording from the middle of a trackAdvanced Recording Start recording Long-play recordingTimes and 4 times long recording Monaural recordingAbout Atrac About the recording modeIndication Recording mode Recording time Press the Edit button To create your own track numbersRecording tracks as a single track Numbering restrictionAbout track numbers To record from a microphone To write recorded contents on the MiniDiscRecording from a Microphone RecordingfromaMicrophoneSound-actuated recording Mic Synchronized recording Creating track numbers manually Track intervalsDuring a mic manual recording During a mic synchro recordingChecking Displays Checking DisplaysTo check the remaining recording time Time of the track Total playing timeVidual track CheckingDisplaysTo display the playing time of an indi Auto Psave Changing Default SettingsChanging Default Settings Auto play ChangingDefaultSettingsAuto power save Beep soundTitling a MiniDisc Titling a MiniDiscCreating disc and track names Disc name Track nameTo erase a character AdvancedFeaturesCharacters symbols TitlingaMiniDiscSelect the character to add Advanced FeaturesPut the unit in the character input mode To add charactersMaster MiniDisc operation Stamping titles from another MiniDiscLoad a MiniDisc for stamping Press the Enter button Operation of the MiniDisc for stampingPress the Enter button again Editing a Recorded MiniDiscTo erase tracks one at a time EditingaRecordedMiniDiscPress the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select DivideTo move a track Listening through a car stereo FeaturesAdvanced Stereo Listening through a stereo systemResuming auto play Other Features and CautionRechargeable battery References MiniDisc System LimitationsErrorMessages Error MessagesTr. Protect Error MessagesTroubleshooting TroubleshootingIf trouble occurs MaintenanceCleaning MaintenanceSpecifications SpecificationsWow and flutter Battery lifeCoding Recording methodSharp Electronics Corporation

MD-MT877 specifications

The Sharp MD-MT877 is a notable addition to the world of portable audio playback devices, especially for those who appreciate the MiniDisc format. Released at a time when digital music began to gain traction, the MD-MT877 combines traditional features with advanced technological characteristics to cater to music enthusiasts.

One of the most significant features of the Sharp MD-MT877 is its MiniDisc playback functionality. MiniDiscs, while not as popular as other digital formats, offered an appealing alternative for music storage owing to their compact size and the ability to record music in high quality. The MD-MT877 supports both playback and recording, allowing users to create custom playlists and save them for later use. This flexibility was a game-changer for users who wanted to curate their music experiences.

The device is equipped with a robust display that provides users with essential information such as track title, artist, and remaining battery life. This LCD screen was designed with clarity in mind, ensuring that users can easily navigate through their music library, even in low-light conditions.

Portability is another key characteristic of the MD-MT877. Its lightweight and compact design make it easy to carry, fitting comfortably into pockets, bags, or purses. The device is powered by a rechargeable battery, ensuring that users can enjoy an extended playback time while minimizing their ecological footprint.

In addition to its core functionalities, the Sharp MD-MT877 incorporates various technologies to enhance the user experience. It features a 5-band equalizer, allowing users to fine-tune the audio to their liking, ensuring optimal sound reproduction tailored to different music genres. Furthermore, the device supports digital pitch control, enabling users to adjust the playback speed, which can be particularly useful for musicians or language learners.

The MD-MT877 also includes a USB port, facilitating easy data transfer between the device and a computer. This allows users to load their favorite music onto the MiniDisc conveniently and update their libraries as needed.

In summary, the Sharp MD-MT877 is a versatile and innovative portable audio player that captures the essence of the MiniDisc era while incorporating features that enhance its usability. With robust playback and recording capabilities, a clear display, user-friendly controls, and a compact design, it remains a cherished device for many audiophiles who appreciate its unique blend of technology and practicality.
Top Page Image Contents