Using ANTI-SKIP ESP Feature, Program Tracks

00:01

INT 00:01

RPT ALL 00:01

RPT 1 00:01

* PLAY MODE

1. NORMAL

• Play Mode

- When Play Mode displayed, press PLAY/PAUSE button to confirm.

-Press MENU UP or MENU DOWN button to select other mode to display:

1.	Normal	2.	Introduction	3.	Repeat 1	4.	Repeat All
5.	Random	6.	Program	7.	ProgramRepeat	8.	Program Random

- Press PLAY/PAUSE (ENTER) button to confirm above mode to be selected. 1. Normal

- Normal playback

mode.

2. Introduction (INT) - Play all tracks for the

first 10 seconds.	PRG RDM		PRG RPT		PRG		RDM
3. Repeat 1 (RPT 1)	00:01	00:01		00:01		00:01

-Repeat to play current track

4.Repeat ALL (RPT ALL)

-Repeat all tracks for the entire disc.

5.Random (RDM)

-Play all tracks in Random sequence.

6.Program (PRG)

-Playback according to program list (within play list), if programmed track(s) available.

7.Program Repeat (PRG RPT)

-Repeat to play the program list (within play list), if programmed track(s) available.

8.Program Random (PRG RDM)

-Playback the program list (within play list) in random sequence, if programmed track(s) available.

•Programmed track delete

Tracks can be deleted in stop or play mode.

-Press MENU button to enter "PLAY LIST"

-Press PLAY/PAUSE (ENTER) button to confirm.

-Press MENU UP or MENU DOWN button for desired tracks.

-Short press PROGRAM button to display.

YES NO

- Long press PROGRAM button to display.

YES NO

-Press >>I or I<< button to change "YES" or "NO"

-Press PLAY/PAUSE button to confirm "YES" or "NO"

If confirmed to "YES", the desired track or all tracks will be deleted.

If confirmed to "NO", the desired track or all tracks will not be deleted.

-Repeat above steps to confirm "YES" or "NO" to delete or keep programmed tracks.

USING ANTI-SKIP (ESP) FEATURE

When playing a CD with CD Audio files, press ESP button (2), then will appear on display.

Note the " " indicator appears on display as being empty when first activated. As it immediately begins to store sound data in memory bank, it shows " " to indicate the data buffer is full.

When the laser loses tracking due to mechanical shock, the data stream into the memory is interrupted but the data output from the memory buffer continues, so the sound is uninterrupted. As the data is read from the memory, the indicator changes from " " to " ".

•Program Tracks

Programs can be set in stop or play mode:

-Select desired tracks by pressing >>I or I<< button.

-Press PROGRAM button to confirm the selected tracks, LCD will show <Selected>.

-Repeat above steps to select more tracks.

•To view program list

-Refer to Play List description.

00:15 < Selected >

Once the laser locks again on the CD track, the data stream is fed to the memory and joined to the previous data (see indicator changes).

REMINDER ...

If the unit is subjected to excessive and continuous repeated shocks, the memory buffer becomes overloaded beyond its capacity therefore causing the sound to skip. Also note the " " indicator will remain empty.

NOTES

•To play program tracks

- Refer to Play Mode - Program, Program Repeat and Program Random.

•When the "ESP" is operating, the battery consumption is higher because the disc rotates faster than normal and the memory circuitry is activated.

•When the digital anti-skip function is switched "ON" or "OFF", the sound is interrupted for a short time. This is normal.