Installation Steps

Installation steps

Before starting the installation process, please back up your personal data and close any programs running on your PC.

Blaupunkt does not accept liability for any deleted data.

Notes: The following driver installation is only required for Windows 98 USB.

In the case of WIN ME / WIN 2000 and WIN XP, all you need do is con- nect the read/write device to the USB port of your PC. After a few seconds, the Windows hardware recognition feature will make the read/write de- vice accessible as an additional drive in Explorer and My Computer.

Write-/ read device

Installation for Windows 98 USB

➮Connect the write-/ read device to your computer using the USB con- nection.

➮The Windows Installation Man- ager starts automatically.

➮Please close it again.

➮Insert the CD-ROM into the CD- ROM drive. If the CD-ROM does not start automatically, open Win- dow’s Desktop icon and then open the CD-ROM drive. Run the “Start.html” file by double clicking on it.

➮Select your language and then the “Write-/ read device”, and start un- packing the drivers by clicking on “Driver installation”.

➮This Step 1 will be completed when you close the “WinZip Self-Extrac- tor”.

➮During Step 2 you will install the driver on your PC.

After Step 2 is complete, the “Write-/ read device” will appear as a “Com- pact Flash Drive” in Explorer or in Desktop.