AUVI Technologies MCB10 manual How To Play MP3 CDs, How To Program The CD Player, Troubleshooting

How To Play MP3 CDs

-Insert a MP3 CD just as a normal CD (described on page 05) .

-Slide the Function switch to CD(MP3).

-The disc will spin and perform a full check of the entire disc.

-Once the check is complete, the first song (track) will start to play and the display will show “MP3”.

-At anytime during playback, press the Next/Back button to skip forward or backward one

track at a time.

-MP3 discs often have “Folders” (sub-directories) which contain groups of songs. To skip to a different folder, press the Skip+10 / Folder button. (If the disc has more than 1 folder.)

How To Program The CD Player

-The CD player can be programmed to play up to 20 consecutive tracks in any given order as desired.

-Always press the Stop button before beginning any progamming.

- Press the Program button, the display will show P and an “P01” will flash, to indicate that the set is now in “Memory Programming Mode”.

-Press the Next/Back button to select the desired tracks (songs).

-When you scan to the numbered track you would like to program, simply press the Program button to store that particular track into the Program Memory.

-Repeat the previous step to program all of the desired tracks (up to 20 total tracks) to be programmed.

-After the maximum 20 tracks have been programmed, (or less).

-Press Play to start the progress of the programmed tracks (songs).

-To clear the memory (cancel the programmed songs), simply press the Stop button or turn OFF the unit entirely.

Troubleshooting

Problems	Possible reasons		Resolvents
Radio
	- Station not tuned properly for AM or FM.	- Retune the AM or FM broadcast
Noise or sound distorted on	- FM: Telescopic antenna is not properly		station.
radio broadcasts		-	Extend wire antenna.
	adjusted.
	- AM: Unit is not positioned correctly.	-	Rotate unit for best reception.
AM or FM, no sound	- Tuner is not selected.	-	Slide the Function switch to
	- Volume at minimum.		select the radio.
		-	Increase volume.
Compact Disc Player
	- There is not a CD in unit.	- Insert a CD and press play.
		- Press FUNCTION button to select
	- CD Function is not selected.
CD will not play			CD.
	- CD is placed with label side down.	- Flip the CD over where label side
			is facing up.
	- CD is scratched/damaged.
		- Discard disc and use another.
	- CD is wrong format.	- Make sure the CD is burned in an
			MP3 file format.

06