Blaupunkt MP54 operating instructions Scanning all tracks on all CDs Scan, Pausing playback Pause

Scanning all tracks on all CDs (SCAN)

To scan (briefly play) all the tracks on all the inserted CDs in ascending order,

➮press and hold down the OK but- ton : for longer than two sec- onds.

“SCAN” and the selected display mode appear alternately in the display.

Stopping SCAN

To stop scanning,

➮briefly press the OK button :.

The currently scanned track will then continue to be played normally.

Note:

●You can set the scanning time. For further information, please read the section entitled “Setting the scan- ning time” in the “Radio mode” chapter.

Pausing playback (PAUSE)

➮Press the 6 button ;. “PAUSE” appears in the display.

Cancelling pause

➮Press the 6 button ; while in pause mode.

Playback is resumed.

CD CHANGER MODE

Naming CDs		DEUTSCH
The car sound system allows you to
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be a maximum of sev-
		ENGLISH
en characters long.
“CD NAME FULL” will appear in the dis	-
play if you try assigning more than 30
names.
		FRANÇAIS
Entering/editing CD names
➮ Listen to the CD that you want.
➮ Press the MENU button 9.		ITALIANO
pears in the display.
➮ Press the or button 7 repeat-
edly until “VARIOUS MENU” ap-
➮ Press the OK button :.		NEDERLANDS
➮ Press the or button 7 repeat-
edly until “CD NAME EDIT” ap-
pears in the display.
➮ Press the OK button :.		SVENSKA
You will now enter editing mode. If your
CD does not have a name yet, “ABC	-
DEFG” appears in the display.
The currently active text input position
flashes.		ESPAÑOL
the character that you want. If you
➮ Use the / buttons 7 to select
want an empty space, simply se-
lect the underscore.		PORTUGUÊS
➮ Use the or button 7 to move
from one text input position to an-
other.
When you have finished making your		DANSK
changes,
➮ press the MENU button 9.

29