Aigo P882 manual Disconnecting from your PC, System requirements

Note: Never remove the USB cord while the computer is reading data, as your data will be lost.

3.2 Disconnecting from your PC

After using your aigo P882, please take the following steps to remove the mass storage device.

Windows 2000/XP: Click the icon on the bottom right of the screen once and a notice “Safely remove USB Storage Device” will appear then click again, indicating the USB has been removed safely.

4. System requirements

„CPU: Pentium III 500 MHz or above

„OS: Windows 2000 or Windows XP (only Windows XP can be used for DRM-MTP)

„Software requirement: Internet Explorer 4.0 or above

„Hard Disk Space: Greater thanthan 100MB

„RAM: 128MB RAM or more

„Transmission port: USB 2.0/1.1

„CD-ROM driver

Note: There is a built-in speaker in aigo P882.

11