Fixing the kitchen radio beneath a wall cabinet
With the supplied mounting plate q you can fix the kitchen radio below, for example, a kitchen wall cabinet:
1.Determine a suitable location for the kitchen radio.
2.Press the two retaining levers on the back of the appliance down. Push the mounting plate q back and remove it.
3.Place the mounting plate q against the instal- lation location. Allow 3,5 cm room to the front edges. This way the kitchen radio will later
fit flush.
4.Mark the four points for the drillholes with a pencil.
5.Mark the drillhole with a mandril.
6.Firmly secure the mounting plate q with the supplied screws.
7.Place the kitchen radio diagonally with the two recesses in the retainer lugs of the mounting plate q. Press the kitchen radio up until you hear it engage.
Note:
Secure the wire antenna with a piece of adhesive tape such that it does not hang down.
Disassembly
•To disassemble the kitchen radio, press the two retaining levers at the rear of the appliance downwards. Then pull the kitchen radio forewards to remove it.
•Unscrew the screws and dismantle the mounting plate.
Note:
Replace the mounting plate onto the radio as described in the following section.
Setting up the kitchen radio
Do not set up the kitchen radio without the mounting plate q. Otherwise the speakers are covered and the sound is scarcely audible.
To set up the kitchen radio with the enclosed mounting plate q:
1.Simultaneously press the two retaining levers on the back of the appliance down. Push the mounting plate q back and remove it.
2.Push the two retainer lugs on the mounting plate q into the recesses on the lower rear side of the kitchen radio.
3.Firmly press the front part of the mounting plate
q down until you hear it engage. You can now set up the radio.
To disassemble the mounting plate q, grip the mounting plate q from below with the thumbs and press it forwards and up until it disengages. You can now remove the mounting plate q.
- 5 -