station is selected to take its place. When the memory is full for a particular band pressing the Memory Selection Button 11 will cause all the positions to flash. In this case,select the desired position. press the Memory Selection Switch 11 and the original station will be eliminated and the new station will take its place.
D.Selecting Memory Presets
Turn on receiver by pressing On/Off Button 5 . Select desired band by pressing Band Selector Button 8 Move the Select Cursor L to the Memory Positions H by Pressing Select Button 12 . Select desired preset position using Memory Up/Down Buttons 13 or 14
E. Automatic Memory Preset System (APS)
This receiver is equipped with an Automatic Memory Preset System that will automatically select. based upon signal strength. and assign positions to stations on the band you select.Turn on receiver by pressing
13