basic instructions | 7 |
Charging the battery
Turn on your computer and connect your device to its USB port either by the USB cable (supplied) or directly. The charging indicator will light up red. Charging takes about 4 hours in the standard mode and 2 hours in the fast charging mode (when the HOLD switch is at “ON”). After the charging is finished, the indicator will light up green.
Caution:
Make sure you disconnect the device from the computer after the charging is finished. The player, even if switched off, still consumes a certain amount of energy to power the internal clock. If the capacity of the battery is exhausted, the clock will be reset.
Connection to a PC and driver Setup
Turn on your computer. If your computer is equipped with Windows ME/2000/XP, the player will be automatically recognized as another drive unit (for example F:\) after it is connected to the USB port. In case the operation system Windows 98, install the driver supplied by the Installation CD before connection the player.
Memory Management
You can use the device the same way as any other disc or storage medium. Excluding the music data it is possible to store any type of files, copy, move or erase them using for example the Windows Explorer.
Disconnecting the player from a PC
Before disconnecting the device from the USB port, make sure you have done following steps:
1)Click with the
2)Select „Safely Remove Large Capacity USB Memory device – drive (X:)“ („X“ states for the device description in the systems). After the confirmation dialogue it is possible to safely disconnect the player.
Keeping these instructions will assure safe
Locking-up controls
To make buttons inoperative and prevent unwanted action of the device, activate the HOLD function. The lock symbol will appear on the display and buttons will be deactivated. To activate buttons deactivate the HOLD function by moving the switch to the opposite direction. The lock symbol will disappear.