PoGo Products Recordable MP3 Player user manual How to use the MP3 Manager Program

Page 4

After installation of the software you can connect the USB cable to the PC. Turn the power on the player. Launch the MP3 Manager and you should be able to view the contents of the player. If you cannot connect to the player try the following procedure.

*After completing the install program, connect the player to your PC using the USB cable. When prompted with the message “t33510.inf file needed,” follow the directions as shown below.

1.Insert the MP3 Manager Software CD into the CD-ROM device on your PC

2.Click the “Find” button, then double-click the “t33510.inf file” prompt, which will install the necessary drivers folder from the CD.

Follow the same directions to install the “Tusb100.sys file.”

How to use the MP3 Manager Program

Double click the MP3 Manager icon to reveal the window shown below.

Image 4
Contents What is the RipFlash Recordable MP3? What does MP3 stand for?Package Contents RipFlash Recordable MP3 PlayerInstalling the MP3 Manager Software from the CD Display InformationHow to use the MP3 Manager Program Formatting Memory Downloading/UploadingPower on/off/Key hold RefreshErase/Erase all Play MP3 tracksMP3 Play mode IntroSelecting the Equalize mode Volume controlLow battery alert How to record/play voice messagesTo record Line-in How to record/play using the Line-in MP3 RecordingTo play a recorded track How to connect the RipFlash to your desktop PC or laptop How to connect to PC driver installation TroubleshootingSafety Precaution Warranty