21-1588.fm Page 14 Thursday, August 5, 1999 10:05 AM
REPLACING THE POWER CORD’S FUSE
The power cord’s 2-amp fuse helps protect your CB from power surges and short circuits. If the fuse is blown, replace it with a 2-amp, 250-volt, fast-acting fuse (Cat. No. 270-1052).
Follow these steps to replace the fuse.
1.Unplug the power cord from the vehicle’s cigarette lighter and the CB.
2.To open the cigarette-lighter plug and remove the fuse, turn the cap counterclockwise and remove it. (Take care not to lose the tip.)
3.If the fuse is blown, replace it.
Caution: Make sure you replace the fuse only with another fuse of the same type and rating.
4.To close the cigarette-lighter plug, replace the cap and turn it clockwise.
14
